0
Research Papers

Lithium-Ion Capacitor: Analysis of Thermal Behavior and Development of Three-Dimensional Thermal Model

[+] Author and Article Information
Gert Berckmans

Department of Electrical Engineering and
Energy Technology,
MOBI Research Group,
Vrije Universiteit Brussel,
Pleinlaan 2,
Brussels 1050, Belgium
e-mail: gberckma@vub.ac.be

Jan Ronsmans

JSR Micro NV,
Technologielaan 8,
Leuven 3011, Belgium

Joris Jaguemont, Ahmadou Samba, Noshin Omar, Omar Hegazy, Mahdi Soltani, Yousef Firouz, Peter van den Bossche, Joeri Van Mierlo

Department of Electrical Engineering and
Energy Technology,
MOBI Research Group,
Vrije Universiteit Brussel,
Pleinlaan 2,
Brussels 1050, Belgium

Manuscript received January 20, 2017; final manuscript received April 24, 2017; published online September 6, 2017. Assoc. Editor: Matthew Mench.

J. Electrochem. En. Conv. Stor. 14(4), 041005 (Sep 06, 2017) (8 pages) Paper No: JEECS-17-1010; doi: 10.1115/1.4037491 History: Received January 20, 2017; Revised April 24, 2017

The large push for more environmental energy storage solutions for the automotive industry by different actors has led to the usage of lithium-ion capacitors (LICs) combining the features of both lithium-ion batteries (LIBs) and electric-double layer capacitors (EDLCs). In this paper, the thermal behavior of two types of advanced LICs has been thoroughly studied and analyzed by developing a three-dimensional (3D) thermal model in COMSOL Multiphysics®. Such an extensive and accurate thermal 3D has not been fully addressed in literature, which is a key building block for designing battery packs with an adequate thermal management. After an extensive measurement campaign, the high accuracy of the developed model in this paper is proven for two types of LICs, the 3300 F and the 2300 F. An error between the simulation and measurements is maximum 2 °C. This 3D model has been developed to gain insight in the thermal behavior of LICs, which is necessary to develop a thermal management system, which can ensure the safe operation of LICs when used in modules or packs.

Copyright © 2017 by ASME
Your Session has timed out. Please sign back in to continue.

References

Mierlo, J. V. , Maggetto, G. , de Burgwal, E. V. , and Gense, R. , 2004, “ Driving Style and Traffic Measures—Influence on Vehicle Emissions and Fuel Consumption,” Proc. Inst. Mech. Eng., Part D, 218(1), pp. 43–53. [CrossRef]
Mierlo, J. V. , Vereecken, L. , Maggetto, G. , Favrel, V. , Meyer, S. , Hecq, W. , and Brussel, V. U. , 2003, “ Comparison of the Environmental Damage Caused by Vehicles With Different Alternative Fuels and Drivetrains in a Brussels Context,” Proc. Inst. Mech. Eng., Part D, 217(7), pp. 583–593. [CrossRef]
Shafiee, S. , and Erkan, T. , 2009, “ When Will Fossil Fuel Reserves Be Diminished?,” Energy Policy, 37(1), pp. 181–189. [CrossRef]
Axen, J. , Burke, A. , and Kurani, K. S. , 2008, “ Batteries for Plug-In Hybrid Electric Vehicles (PHEVs): Goals and the State of Technology Circa 2008,” ITS UC Davis, Davis, CA. https://ideas.repec.org/p/cdl/itsdav/qt1bp83874.html
Omar, N. , Van Mierlo, J. , Verbrugge, B. , and Van den Bossche, P. , 2010, “ Power and Life Enhancement of Battery-Electrical Double Layer Capacitor for Hybrid Electric and Charge-Depleting Plug-In Vehicle Applications,” Electrochim. Acta, 55(25), pp. 7524–7531. [CrossRef]
Grunditz, E. A. , and Thiringer, T. , 2016, “ Performance Analysis of Current BEVs—Based on a Comprehensive Review of Specifications,” Trans. Transp. Electrification, 2(3), pp. 270–289.
Ning, G. , Haran, B. , and Popov, B. N. , 2003, “ Capacity Fade Study of Lithium-Ion Batteries Cycled at High Discharge Rates,” J. Power Sources, 117(1–2), pp. 160–169.
Jaguemont, J. , Boulon, L. , and Venet, P. , 2016, “ Lithium Ion Battery Aging Experiments at Sub-Zero Temperatures and Model Development for Capacity Fade Estimation,” IEEE Trans. Veh. Technol., 65(6), pp. 4328–4343. [CrossRef]
Jaguemont, J. , Boulon, L. , and Dubé, Y. , 2016, “ A Comprehensive Review of Lithium-Ion Batteries Used in Hybrid and Electric Vehicles at Cold Temperatures,” Appl. Energy, 164, pp. 99–114. [CrossRef]
Omar, N. , Daowd, M. , Hegazy, O. , Bossche, P. V. D. , Coosemans, T. , and Mierlo, J. V. , 2012, “ Electrical Double-Layer Capacitors in Hybrid Topologies-Assessment and Evaluation of Their Performance,” Energies, 5(11), pp. 4533–4568. [CrossRef]
Risa, M. , Yukinori, H. , and Inagawa, M. , 2010, “ Development of High-Power Lithium-Ion Capacitor,” NEC Tech. J., 5, pp. 52–56. http://www.nec.com/en/global/techrep/journal/g10/n04/pdf/100410.pdf
Amatucci, G. , Badway, F. , Pasquier, A. D. , and Zheng, T. , 2001, “ An Asymmetric Hybrid Nonaqueous Energy Storage Cell,” J. Electrochem. Soc., 148(8), pp. 930–939. [CrossRef]
Wang, Y.-G. , Luo, J.-Y. , Wang, C.-X. , and Xia, Y.-Y. , 2006, “ Hybrid Aqueous Energy Storage Cells Using Activated Carbon and Lithium-Ion Intercalated Compounds,” J. Electrochem. Soc., 153(8), pp. 1425–1431. [CrossRef]
Karthikeyan, K. , Aravindan, V. , Lee, S. B. , Jang, I. C. , Lim, H. H. , Park, G. J. , Yoshio, M. , and Lee, Y. S. , 2010, “ A Novel Asymmetric Hybrid Supercapacitor Based on Li2FeSiO4 and Activated Carbon Electrodes,” J. Alloys Compd., 504(1), pp. 224–227. [CrossRef]
Gualous, H. , Alcicek, G. , Diab, Y. , Hammar, A. , Venet, P. , Akiyama, M. , and Marumo, C. , 2008, “ Lithium Ion Capacitor Characterization and Modelling,” 69th Session of the Economic and Social Commission for Asia and the Pacific (ESCAP), Bangkok, Thailand, Apr. 25-May 1, Paper No. 00373149. https://hal.archives-ouvertes.fr/hal-00373149
Omar, N. , Sakka, M. A. , and Van Mierlo, J. , 2013, “ Electric and Thermal Characterization of Advanced Hybrid Li-Ion Capacitor Rechargeable Energy Storage System,” Fourth International Conference on Power Engineering, Energy and Electrical Drives (POWERENG), Istanbul, Turkey, May 13–17, pp. 1574–1580.
Smith, P. H. , Tran, T. N. , Jiang, T. L. , and Chung, J. , 2013, “ Lithium-Ion Capacitors: Electrochemical Performance and Thermal Behavior,” J. Power Sources, 243, pp. 982–992. [CrossRef]
Omar, N. , Daowd, M. , Hegazy, O. , Al Sakka, M. , Coosemans, T. , Van den Bossche, P. , and Van Mierlo, J. , 2012, “ Assessment of Lithium-Ion Capacitor for Using in Battery Electric Vehicle and Hybrid Electric Vehicle Applications,” Electrochim. Acta, 86, pp. 305–315. [CrossRef]
Miller, J. R. , and Burke, A. F. , 2008, “ Electrochemical Capacitors: Challenges and Opportunities for Real-World Applications,” Electrochem. Soc., 17(1), pp. 53–57. https://www.scribd.com/document/121341643/Electrochemical-capacitors-Challenges-and-Opportunities-for-Real-World-Applications
Porcarelli, D. , Brunelli, D. , and Benini, L. , 2012, “ Characterization of Lithium-Ion Capacitors for Low-Power Energy Neutral Wireless Sensor Networks,” Ninth International Conference on Networked Sensing Systems (INSS), Antwerp, Belgium, June 11–14, pp. 1–4.
Lambert, S. M. , Pickert, V. , Holden, J. , and He, X. , 2010, “ Comparison of Supercapacitor and Lithium-Ion Capacitor Technologies for Power Electronics Applications,” Fifth IET International Conference on Power Electronics, Machines and Drives (PEMD), Brighton, UK, Apr. 19–21, pp. 1–5.
Manla, E. , Mandic, G. , and Nasiri, A. , 2015, “ Development of an Electrical Model for Lithium-Ion Ultracapacitors,” IEEE J. Emerging Sel. Top. Power Electron., 3(2), pp. 395–404. [CrossRef]
Barcellona, S. , and Piegari, L. , 2017, “ A Lithium-Ion Capacitor Model Working on a Wide Temperature Range,” J. Power Sources, 342, pp. 241–251. [CrossRef]
Nakajo, K. , Aoki, S. , Yatsuda, T. , Takahashi, S. , and Motegi, K. , 2016, “ Modeling of a Lithium-Ion Capacitor and Its Charging and Discharging Circuit in a Model-Based Design,” Circuits Syst., 7, pp. 11–22.
Ghossein, N. E. , Sari, A. , Venet, P. , and Lyon, U. , 2016, “ Interpretation of the Particularities of Lithium-Ion Capacitors and Development of a Simple Circuit Model,” IEEE Vehicle Power and Propulsion Conference (VPPC), Hangzhou, China, Oct. 17–20, pp. 1–5.
Pesaran, A. A. , 2001, “ Battery Thermal Management in EVs and HEVs: Issues and Solutions,” First Annual Advanced Automotive Battery Conference, Las Vegas, NV, Feb. 5–8. https://www.nrel.gov/transportation/assets/pdfs/aabc_presentation.pdf
Uno, M. , and Kukita, A. , 2016, “ Cycle Life Evaluation Based on Accelerated Aging Testing for Lithium-Ion Capacitors as Alternative to Rechargeable Batteries,” IEEE Trans. Ind. Electron., 63(3), pp. 1607–1617. [CrossRef]
Samba, A. , Omar, N. , Gualous, H. , Capron, O. , Van den Bossche, P. , and Van Mierlo, J. , 2014, “ Impact of Tab Location on Large Format Lithium-Ion Pouch Cell Based on Fully Coupled Three-Dimensional Electrochemical-Thermal Modeling,” Electrochim. Acta, 147, pp. 319–329. [CrossRef]
Cengel, Y. , 2008, Fundamentals of Thermal-Fluid Sciences, McGraw-Hill, New York.
Firouz, Y. , Omar, N. , and Van den Bossche, P. , 2014, “ Electro-Thermal Modeling of New Prismatic Lithium-Ion Capacitors,” IEEE Vehicle Power and Propulsion Conference (VPPC), Coimbra, Portugal, Oct. 27–30, pp. 1–6.
Bernardi, D. , Pawlikowski, E. , and Newman, J. , 1984, “ A General Energy Balance for Battery Systems,” The Electrochemical Society, 132(1), pp. 5–12.
Chen, S. C. , Wan, C. C. , and Wang, Y. Y. , 2005, “ Thermal Analysis of Lithium-Ion Batteries,” J. Power Sources, 140(1), pp. 111–124. [CrossRef]
Goutam, S. , Jaguemont, J. , Nikolian, A. , and Firouz, Y. , 2016, “ Lithium-Ion Batteries—Analysis of Non-Uniformity of Surface Temperature of Commercial Cells Under Realistic Driving Cycles,” Electric Vehicle Symposium & Exhibition (EVS29), Montreal, QC, Canada, June 19–22. https://cris.cumulus.vub.ac.be/portal/en/publications/lithiumion-batteries--analysis-of-nonuniformity-of-surface-temperature-of-commercial-cells-under-realistic-driving-cycles(b588767a-e9d9-4bb3-ac16-1a4a640d39ed).html
Goutam, S. , Timmermans, J.-M. , Omar, N. , Bossche, P. , and Van Mierlo, J. , 2015, “ Comparative Study of Surface Temperature Behavior of Commercial Li-Ion Pouch Cells of Different Chemistries and Capacities by Infrared Thermography,” Energies, 8(8), pp. 8175–8192. [CrossRef]
Chen, D. , Jiang, J. , Kim, G. H. , Yang, C. , and Pesaran, A. , 2016, “ Comparison of Different Cooling Methods for Lithium Ion Battery Cells,” Appl. Therm. Eng., 94, pp. 846–854. [CrossRef]
Giuliano, M. R. , Prasad, A. K. , and Advani, S. G. , 2012, “ Experimental Study of an Air-Cooled Thermal Management System for High Capacity Lithium-Titanate Batteries,” J. Power Sources, 216, pp. 345–352. [CrossRef]
Martel, F. , Kelouwani, S. , and Agbossou, K. , 2016, “ Active Battery Thermal Management Integrated to Cold Weather Optimal PHEV Autonomy Extension,” IEEE Vehicle Power and Propulsion Conference (VPPC), Hangzhou, China, Oct. 17–20, pp. 1–6.
Ling, Z. , Wang, F. , Fang, X. , Gao, X. , and Zhang, Z. , 2015, “ A Hybrid Thermal Management System for Lithium Ion Batteries Combining Phase Change Materials With Forced-Air Cooling,” Appl. Energy, 148, pp. 403–409. [CrossRef]

Figures

Grahic Jump Location
Fig. 1

Ragone plot: comparison LIBs versus LICs versus EDLCs

Grahic Jump Location
Fig. 2

Geometric representation of the LIC

Grahic Jump Location
Fig. 4

Load profile 1–100 A

Grahic Jump Location
Fig. 5

Thermal capacitance of LIC based on load profile 1

Grahic Jump Location
Fig. 6

Resistive conductivity of LIC based on load profile 1

Grahic Jump Location
Fig. 7

Convection of LIC based on load profile 1

Grahic Jump Location
Fig. 8

Heat source of LIC based on load profile 1

Grahic Jump Location
Fig. 10

Meshing of the cell

Grahic Jump Location
Fig. 11

Measured and simulated temperature at middle of the cell at 100 A–2300 F

Grahic Jump Location
Fig. 12

3D simulation error at 100 A–2300 F

Grahic Jump Location
Fig. 13

Measured and simulated temperature at middle of the cell at 50 A–2300 F

Grahic Jump Location
Fig. 14

3D simulation error at 50 A–2300 F

Grahic Jump Location
Fig. 15

Comparison between 3D model and thermal camera images at different time steps for the 2300 F cell based on the applied load profile 2: (a) 3D simulation of LIC at 1000 s, (b) thermal image of LIC at 1000 s, (c) 3D simulation of LIC at 5000 s, and (d) thermal image of LIC at 5000 s

Grahic Jump Location
Fig. 16

Measured and simulated temperature at the middle of the cell at 100 A–3300 F

Grahic Jump Location
Fig. 17

Measured and simulated temperature at the middle of the cell at 50 A–3300 F

Grahic Jump Location
Fig. 18

3D simulation error at 100 A–3300 F

Grahic Jump Location
Fig. 19

3D simulation error at 50 A–3300 F

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In