Bone is similar to fiber-reinforced composite materials made up of distinct phases such as osteons (fiber), interstitial bone (matrix), and cement lines (matrix-fiber interface). Microstructural features including osteons and cement lines are considered to play an important role in determining the crack growth behavior in cortical bone. The aim of this study is to elucidate possible mechanisms that affect crack penetration into osteons or deflection into cement lines using fracture mechanics-based finite element modeling. Cohesive finite element simulations were performed on two-dimensional models of a single osteon surrounded by a cement line interface and interstitial bone to determine whether the crack propagated into osteons or deflected into cement lines. The simulations investigated the effect of (i) crack orientation with respect to the loading, (ii) fracture toughness and strength of the cement line, (iii) crack length, and (iv) elastic modulus and fracture properties of the osteon with respect to the interstitial bone. The results of the finite element simulations showed that low cement line strength facilitated crack deflection irrespective of the fracture toughness of the cement line. However, low cement line fracture toughness did not guarantee crack deflection if the cement line had high strength. Long cracks required lower cement line strength and fracture toughness to be deflected into cement lines compared with short cracks. The orientation of the crack affected the crack growth trajectory. Changing the fracture properties of the osteon influenced the crack propagation path whereas varying the elastic modulus of the osteon had almost no effect on crack trajectory. The findings of this study present a computational mechanics approach for evaluating microscale fracture mechanisms in bone and provide additional insight into the role of bone microstructure in controlling the microcrack growth trajectory.
Skip Nav Destination
e-mail: ani.ural@villanova.edu
Article navigation
July 2011
Research Papers
Finite Element Modeling of Microcrack Growth in Cortical Bone
Ani Ural
Ani Ural
Assistant Professor
Department of Mechanical Engineering,
e-mail: ani.ural@villanova.edu
Villanova University
, 800 Lancaster Avenue, Villanova, PA 19085
Search for other works by this author on:
Ani Ural
Assistant Professor
Department of Mechanical Engineering,
Villanova University
, 800 Lancaster Avenue, Villanova, PA 19085e-mail: ani.ural@villanova.edu
J. Appl. Mech. Jul 2011, 78(4): 041016 (9 pages)
Published Online: April 14, 2011
Article history
Received:
July 12, 2010
Revised:
February 14, 2011
Posted:
March 7, 2011
Published:
April 14, 2011
Online:
April 14, 2011
Citation
Mischinski, S., and Ural, A. (April 14, 2011). "Finite Element Modeling of Microcrack Growth in Cortical Bone." ASME. J. Appl. Mech. July 2011; 78(4): 041016. https://doi.org/10.1115/1.4003754
Download citation file:
Get Email Alerts
Hamiltonian System-Based Symplectic Framework for Analytical Vibration Analysis of Microplates
J. Appl. Mech (December 2024)
Related Articles
Simulating Distal Radius Fracture Strength Using Biomechanical Tests: A Modeling Study Examining the Influence of Boundary Conditions
J Biomech Eng (November,2011)
Influence of Clinically Relevant Factors on the Immediate Biomechanical Surrounding for a Series of Dental Implant Designs
J Biomech Eng (March,2011)
Effect of Meso to Micro Transition in Morphology Dependent Fracture of SiC Ceramics
J. Eng. Mater. Technol (October,2011)
A Voronoi FE Fatigue Damage Model for Life Scatter in Rolling Contacts
J. Tribol (April,2010)
Related Proceedings Papers
Related Chapters
Data Tabulations
Structural Shear Joints: Analyses, Properties and Design for Repeat Loading
In Situ Observations of the Failure Mechanisms of Hydrided Zircaloy-4
Zirconium in the Nuclear Industry: 20th International Symposium
Effects of Microstructural Composition, Porosity, and Microcracks on the Elastic Moduli of Nuclear Graphites
Graphite Testing for Nuclear Applications: The Validity and Extension of Test Methods for Material Exposed to Operating Reactor Environments