A disturbance observer based tracking control algorithm is presented in this paper. The key idea of the proposed method is that the plant nonlinearities and parameter variations can be lumped into a disturbance term. The lumped disturbance signal is estimated based on a plant dynamic observer. A state observer then corrects the disturbance estimation in a two-step design. First, a Lyapunov-based feedback estimation law is used. The estimation is then improved by using a feedforward correction term. The control of a telescopic robot arm is used as an example system for the proposed algorithm. Simulation results comparing the proposed algorithm against a standard adaptive control scheme and a sliding mode control algorithm show that the proposed scheme achieves superior performance, especially when large external disturbances are present. [S0022-0434(00)00802-9]
Skip Nav Destination
e-mail: hpeng@umich.edu
Article navigation
June 2000
Technical Papers
Disturbance Observer Based Tracking Control
Chia-Shang Liu,
Chia-Shang Liu
Department of Mechanical Engineering and Applied Mechanics, University of Michigan, Ann Arbor, MI 48109-2121
Search for other works by this author on:
Huei Peng
e-mail: hpeng@umich.edu
Huei Peng
Department of Mechanical Engineering and Applied Mechanics, University of Michigan, Ann Arbor, MI 48109-2121
Search for other works by this author on:
Chia-Shang Liu
Department of Mechanical Engineering and Applied Mechanics, University of Michigan, Ann Arbor, MI 48109-2121
Huei Peng
Department of Mechanical Engineering and Applied Mechanics, University of Michigan, Ann Arbor, MI 48109-2121
e-mail: hpeng@umich.edu
Contributed by the Dynamic Systems and Control Division for publication in the JOURNAL OF DYNAMIC SYSTEMS, MEASUREMENT, AND CONTROL. Manuscript received by the Dynamic Systems and Control Division May 15, 1997. Associate Technical Editor: E. Misawa.
J. Dyn. Sys., Meas., Control. Jun 2000, 122(2): 332-335 (4 pages)
Published Online: May 15, 1997
Article history
Received:
May 15, 1997
Citation
Liu , C., and Peng, H. (May 15, 1997). "Disturbance Observer Based Tracking Control ." ASME. J. Dyn. Sys., Meas., Control. June 2000; 122(2): 332–335. https://doi.org/10.1115/1.482459
Download citation file:
Get Email Alerts
Modeling and Control of a 3-DOF planar Cable-Driven Parallel Robot with Flexible Cables
J. Dyn. Sys., Meas., Control
Reviewer's Recognition
J. Dyn. Sys., Meas., Control (May 2025)
Adaptive Mesh Refinement and Error Estimation Method for Optimal Control Using Direct Collocation
J. Dyn. Sys., Meas., Control
Motion Control Along Spatial Curves for Robot Manipulators: A Non-Inertial Frame Approach
J. Dyn. Sys., Meas., Control
Related Articles
Adaptive Output Force Tracking Control of Hydraulic Cylinders With Applications to Robot Manipulators
J. Dyn. Sys., Meas., Control (June,2005)
Rest-to-Rest Motion for Planar Multi-Link Flexible Manipulator Through Backward Recursion
J. Dyn. Sys., Meas., Control (March,2004)
Two-Degree-of-Freedom Optimal Preview Tracking Control: A Mechatronic Design Example
J. Dyn. Sys., Meas., Control (December,2002)
Hierarchical Sliding Mode Control for the Trajectory Tracking of a Tendon-Driven Manipulator
J. Mechanisms Robotics (December,2023)
Related Proceedings Papers
Related Chapters
Feedback-Aided Minimum Joint Motion
Robot Manipulator Redundancy Resolution
QP Based Encoder Feedback Control
Robot Manipulator Redundancy Resolution
Infinitesimal Kinematics of Serial-kinematics Machines
Mechanics of Accuracy in Engineering Design of Machines and Robots Volume I: Nominal Functioning and Geometric Accuracy