Thermal, electrical, and electrocatalytical properties of the oxygen deficient La0.5Sr0.2TiO2.95 perovskite are studied in relation to their possible use as solid oxide fuel cell (SOFC) anode material. La0.5Sr0.2TiO2.95 is chemically stable under air and reduced atmosphere. Its thermal expansion coefficient is close to that of yttrium-stabilized zirconia (YSZ) under air and Ar/H2 (5%). No significant chemical expansion or contraction of La0.5Sr0.2TiO2.95 are observed between air and reduced atmosphere. La0.5Sr0.2TiO2.95 material has an electrical conductivity at 800 °C of 1 S cm−1 under moist hydrogen (H2/H2O (3%)), reaching 10 S cm−1 when LSTO is prereduced under Ar/H2(5%). The polarization resistance of La0.5Sr0.2TiO2.95 at 800 °C under moist hydrogen is about 1.5 Ω cm2, a value which has been obtained when including a thin CGO buffer layer between the dense YSZ electrolyte and the porous electrode.
Skip Nav Destination
Recherche Scientifique,
Université de Bordeaux,
Institute of Condensed Matter
Chemistry of Bordeaux,
Pessac-Cedex 33608,
Recherche Scientifique,
Université de Bordeaux,
Institute of Condensed Matter
Chemistry of Bordeaux,
Pessac-Cedex 33608,
Recherche Scientifique,
Université de Bordeaux,
Institute of Condensed Matter
Chemistry of Bordeaux,
Pessac-Cedex 33608,
Article navigation
August 2014
This article was originally published in
Journal of Fuel Cell Science and Technology
Research-Article
La0.5Sr0.2TiO3-δ Perovskite as Anode Material for Solid Oxide Fuel Cells
S. Roudeau,
Recherche Scientifique,
Université de Bordeaux,
Institute of Condensed Matter
Chemistry of Bordeaux,
Pessac-Cedex 33608,
S. Roudeau
Centre Nationale de la
Recherche Scientifique,
Université de Bordeaux,
Institute of Condensed Matter
Chemistry of Bordeaux,
87 Av. du Dr. A. Schweitzer
,Pessac-Cedex 33608,
France
Search for other works by this author on:
J. C. Grenier,
Recherche Scientifique,
Université de Bordeaux,
Institute of Condensed Matter
Chemistry of Bordeaux,
Pessac-Cedex 33608,
J. C. Grenier
Centre Nationale de la
Recherche Scientifique,
Université de Bordeaux,
Institute of Condensed Matter
Chemistry of Bordeaux,
87 Av. du Dr. A. Schweitzer
,Pessac-Cedex 33608,
France
Search for other works by this author on:
J. M. Bassat
Recherche Scientifique,
Université de Bordeaux,
Institute of Condensed Matter
Chemistry of Bordeaux,
Pessac-Cedex 33608,
J. M. Bassat
1
Centre Nationale de la
Recherche Scientifique,
Université de Bordeaux,
Institute of Condensed Matter
Chemistry of Bordeaux,
87 Av. du Dr. A. Schweitzer
,Pessac-Cedex 33608,
France
1Corresponding author.
Search for other works by this author on:
S. Roudeau
Centre Nationale de la
Recherche Scientifique,
Université de Bordeaux,
Institute of Condensed Matter
Chemistry of Bordeaux,
87 Av. du Dr. A. Schweitzer
,Pessac-Cedex 33608,
France
J. C. Grenier
Centre Nationale de la
Recherche Scientifique,
Université de Bordeaux,
Institute of Condensed Matter
Chemistry of Bordeaux,
87 Av. du Dr. A. Schweitzer
,Pessac-Cedex 33608,
France
J. M. Bassat
Centre Nationale de la
Recherche Scientifique,
Université de Bordeaux,
Institute of Condensed Matter
Chemistry of Bordeaux,
87 Av. du Dr. A. Schweitzer
,Pessac-Cedex 33608,
France
1Corresponding author.
Contributed by the Advanced Energy Systems Division of ASME for publication in the JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY. Manuscript received June 3, 2013; final manuscript received February 7, 2014; published online March 21, 2014. Editor: Nigel M. Sammes.
J. Fuel Cell Sci. Technol. Aug 2014, 11(4): 041006 (6 pages)
Published Online: March 21, 2014
Article history
Received:
June 3, 2013
Revision Received:
February 7, 2014
Accepted:
February 18, 2014
Citation
Roudeau, S., Grenier, J. C., and Bassat, J. M. (March 21, 2014). "La0.5Sr0.2TiO3-δ Perovskite as Anode Material for Solid Oxide Fuel Cells." ASME. J. Fuel Cell Sci. Technol. August 2014; 11(4): 041006. https://doi.org/10.1115/1.4026933
Download citation file:
Get Email Alerts
Cited By
Online Measurement of Impedance Spectroscopy of Lithium-ion Batteries Based on Equalised Current Harmonic Injection
J. Electrochem. En. Conv. Stor
Improving the Discharge Characteristics of Nonaqueous Lithium Oxygen Batteries by Constructing Microchannels
J. Electrochem. En. Conv. Stor
In Situ Synthesis of Nano PtRuW/WC Hydrogen Evolution Reaction Catalyst for Acid Hydrogen Evolution by a Microwave Method
J. Electrochem. En. Conv. Stor (November 2025)
Intelligently Constructing Polyaniline/Nickel Hydroxide Core–Shell Nanoflowers as Anode for Flexible Electrode-Enhanced Lithium-/Sodium-Ion Batteries
J. Electrochem. En. Conv. Stor (November 2025)
Related Articles
Evaluation of SrTi 1− x Co x O 3 Perovskites (0 ≤ x ≤ 0.2) as Interconnect Materials for Solid Oxide Fuel Cells
J. Fuel Cell Sci. Technol (October,2011)
Nanoscale Gd-Doped CeO 2 Buffer Layer for a High Performance Solid Oxide Fuel Cell
J. Fuel Cell Sci. Technol (August,2011)
All-Perovskite Solid Oxide Fuel Cells, Synthesis and Characterization
J. Fuel Cell Sci. Technol (May,2009)
Compositional Effect of Thin Electrode Functional Layers on the Performance of Solid Oxide Fuel Cells
J. Fuel Cell Sci. Technol (December,2011)
Related Proceedings Papers
Related Chapters
Glossary of Terms
Consensus on Operating Practices for Control of Water and Steam Chemistry in Combined Cycle and Cogeneration
Protocol for Chemical Analyses
Guidebook for Waste and Soil Remediation: For Nonhazardous Petroleum and Salt Contaminated Sites
Handy Facts Regarding Types of Thermal Insulation
Hydraulics, Pipe Flow, Industrial HVAC & Utility Systems: Mister Mech Mentor, Vol. 1