Skip Nav Destination
Issues
December 2012
This article was originally published in
Journal of Fuel Cell Science and Technology
ISSN 1550-624X
EISSN 1551-6989
In this Issue
Research Papers
An Empirical Stationary Fuel Cell Model Using Limited Experimental Data for Identification
J. Fuel Cell Sci. Technol. December 2012, 9(6): 061001.
doi: https://doi.org/10.1115/1.4007195
Topics:
Artificial neural networks
,
Fuel cells
,
Modeling
,
Parameter estimation
,
Anodes
,
Pressure
Process Optimization and Remanufacturability Analysis of Fuel Cell— Membrane Electrode Assembly With Process Simulation
J. Fuel Cell Sci. Technol. December 2012, 9(6): 061002.
doi: https://doi.org/10.1115/1.4007418
Topics:
Membranes
,
Process simulation
,
Membrane electrode assemblies
,
Anodes
,
Fuel cells
,
Optimization
Deactivation of Ni-YSZ Material in Dry Methane and Oxidation of Various Forms of Deposited Carbon
J. Fuel Cell Sci. Technol. December 2012, 9(6): 061003.
doi: https://doi.org/10.1115/1.4007272
Topics:
Carbon
,
Methane
,
Temperature
,
Oxidation
Numerical Simulation of Multispecies Mass Transfer in a SOFC Electrodes Layer Using Lattice Boltzmann Method
J. Fuel Cell Sci. Technol. December 2012, 9(6): 061004.
doi: https://doi.org/10.1115/1.4007791
Mechanical Degradation Mechanism of Membrane Electrode Assemblies in Buckling Test Under Humidity Cycles
J. Fuel Cell Sci. Technol. December 2012, 9(6): 061005.
doi: https://doi.org/10.1115/1.4007814
Topics:
Buckling
,
Cycles
,
Finite element methods
,
Stress
,
Membrane electrode assemblies
,
Deformation
,
Fracture (Materials)
,
Simulation
Seal Leakage Effects on the Electrical Performance of an SOFC Button Cell
J. Fuel Cell Sci. Technol. December 2012, 9(6): 061006.
doi: https://doi.org/10.1115/1.4007815
Topics:
Anodes
,
Leakage
,
Solid oxide fuel cells
,
Testing
,
Hydrogen
,
Fuels
,
Modeling
,
Model validation
Surface-to-Surface Radiation Exchange Effects in a 3D SOFC Stack Unit Cell
J. Fuel Cell Sci. Technol. December 2012, 9(6): 061007.
doi: https://doi.org/10.1115/1.4007816
Topics:
Heat
,
Radiation (Physics)
,
Solid oxide fuel cells
,
Temperature
,
Heat transfer
Computational Study of Edge Cooling for Open-Cathode Polymer Electrolyte Fuel Cell Stacks
J. Fuel Cell Sci. Technol. December 2012, 9(6): 061008.
doi: https://doi.org/10.1115/1.4007792
Topics:
Cooling
,
Fins
,
Fuel cells
,
Thermal management
,
Design
,
Electrolytes
,
Polymers
Email alerts
RSS Feeds
Optimization of Thermal Non-Uniformity Challenges in Liquid-Cooled Lithium-Ion Battery Packs Using NSGA-II
J. Electrochem. En. Conv. Stor (November 2025)
In Situ Synthesis of Nano PtRuW/WC Hydrogen Evolution Reaction Catalyst for Acid Hydrogen Evolution by a Microwave Method
J. Electrochem. En. Conv. Stor (November 2025)
Intelligently Constructing Polyaniline/Nickel Hydroxide Core–Shell Nanoflowers as Anode for Flexible Electrode-Enhanced Lithium-/Sodium-Ion Batteries
J. Electrochem. En. Conv. Stor (November 2025)
State of Health Estimation Method for Lithium-Ion Batteries Based on Multifeature Fusion and BO-BiGRU Model
J. Electrochem. En. Conv. Stor (November 2025)
Nitrogen and Phosphorus Co-Doped Hard Carbon Materials as High-Performance Anode for Sodium Ion Batteries
J. Electrochem. En. Conv. Stor (August 2025)
