In the numerical simulation of turbulent reacting flows, the high computational cost of integrating the reaction equations precludes the inclusion of detailed chemistry schemes, therefore reduced reaction mechanisms have been the more popular route for describing combustion chemistry, albeit at the loss of generality. The in situ adaptive tabulation scheme (ISAT) has significantly alleviated this problem by facilitating the efficient integration of the reaction equations via a unique combination of direct integration and dynamic creation of a look-up table, thus allowing for the implementation of detailed chemistry schemes in turbulent reacting flow calculations. In the present paper, the probability density function (PDF) method for turbulent combustion modeling is combined with the ISAT in a combustor design system, and calculations of a piloted jet diffusion flame and a low-emissions premixed gas turbine combustor are performed. It is demonstrated that the results are in good agreement with experimental data and computations of practical turbulent reacting flows with detailed chemistry schemes are affordable.
Skip Nav Destination
Article navigation
October 2001
Technical Papers
In Situ Detailed Chemistry Calculations in Combustor Flow Analyses
S. James,
S. James
Rolls-Royce Allison, P.O. Box 420, Speed Code T-14, Indianapolis, IN 46206
Search for other works by this author on:
M. S. Anand,
M. S. Anand
Rolls-Royce Allison, P.O. Box 420, Speed Code T-14, Indianapolis, IN 46206
Search for other works by this author on:
M. K. Razdan,
M. K. Razdan
Rolls-Royce Allison, P.O. Box 420, Speed Code T-14, Indianapolis, IN 46206
Search for other works by this author on:
S. B. Pope
S. B. Pope
Sibley School of Mechanical and Aerospace Engineering, Cornell University, Ithaca, NY 14853
Search for other works by this author on:
S. James
Rolls-Royce Allison, P.O. Box 420, Speed Code T-14, Indianapolis, IN 46206
M. S. Anand
Rolls-Royce Allison, P.O. Box 420, Speed Code T-14, Indianapolis, IN 46206
M. K. Razdan
Rolls-Royce Allison, P.O. Box 420, Speed Code T-14, Indianapolis, IN 46206
S. B. Pope
Sibley School of Mechanical and Aerospace Engineering, Cornell University, Ithaca, NY 14853
Contributed by the International Gas Turbine Institute (IGTI) of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. Paper presented at the International Gas Turbine and Aeroengine Congress and Exhibition, Indianapolis, IN, June 7–10, 1999; ASME Paper 99-GT-271. Manuscript received by IGTI Oct. 1998; final revision received by the ASME Headquarters Mar. 1999. Associate Editor: D. Wisler.
J. Eng. Gas Turbines Power. Oct 2001, 123(4): 747-756 (10 pages)
Published Online: March 1, 1999
Article history
Received:
October 1, 1998
Revised:
March 1, 1999
Citation
James , S., Anand , M. S., Razdan, M. K., and Pope, S. B. (March 1, 1999). "In Situ Detailed Chemistry Calculations in Combustor Flow Analyses ." ASME. J. Eng. Gas Turbines Power. October 2001; 123(4): 747–756. https://doi.org/10.1115/1.1384878
Download citation file:
Get Email Alerts
Image-based flashback detection in a hydrogen-fired gas turbine using a convolutional autoencoder
J. Eng. Gas Turbines Power
Fuel Thermal Management and Injector Part Design for LPBF Manufacturing
J. Eng. Gas Turbines Power
An investigation of a multi-injector, premix/micromix burner burning pure methane to pure hydrogen
J. Eng. Gas Turbines Power
Related Articles
The Premixed Conditional Moment Closure Method Applied to Idealized Lean Premixed Gas Turbine Combustors
J. Eng. Gas Turbines Power (October,2003)
A Computational Study of Pressure Effects on Pollutant Generation in Gas Turbine Combustors
J. Eng. Gas Turbines Power (January,1997)
Coupled Lagrangian Monte Carlo PDF–CFD Computation of Gas Turbine Combustor Flowfields With Finite-Rate Chemistry
J. Eng. Gas Turbines Power (July,1997)
Towards Modeling Lean Blow Out in Gas Turbine Flameholder Applications
J. Eng. Gas Turbines Power (January,2006)
Related Proceedings Papers
Related Chapters
Outlook
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
Augmentation of Turbulence and Mixing in Gas Turbine Combustors by Introducing Unsteady Effects
Proceedings of the 2010 International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2010)
The Identification of the Flame Combustion Stability by Combining Principal Component Analysis and BP Neural Network Techniques
International Conference on Mechanical Engineering and Technology (ICMET-London 2011)