The simulation of heat release, flame propagation speeds, and pollutant formation was carried out in both a turbocharged compressed natural gas (CNG) engine and a multivalve naturally aspirated bifuel engine running on either CNG or gasoline. The predictive tool used for investigation is based on an enhanced fractal geometry concept of the flame front, which is able to capture the modulation of turbulent to laminar burning speed ratio throughout the overall combustion phase without introducing flame kernel growth or burnout submodels. The prediction model was applied to a wide range of engine speeds, loads, relative air-fuel ratios, and spark advances, and the obtained results were compared to experimental data. These latter were extracted from measured in-cylinder pressure by an advanced diagnostics technique that was previously developed by the authors. The results confirmed a quite accurate prediction of burning speed even without any kind of tuning, with respect to different currently available fractal as well as nonfractal approaches for the simulation of flame-turbulence interaction. Furthermore, the computational code proved to be capable of capturing the effects of fuel composition, different combustion-chamber concepts, and operating conditions on engine performance and emissions.
Skip Nav Destination
Article navigation
November 2008
Research Papers
Prediction of Combustion Parameters, Performance, and Emissions in Compressed Natural Gas and Gasoline SI Engines
Mirko Baratta,
Mirko Baratta
IC Engines Advanced Laboratory
, Dipartimento di Energetica, Politecnico di Torino, C.so Duca degli Abruzzi, 24 10129 Torino, Italy
Search for other works by this author on:
Andrea E. Catania,
Andrea E. Catania
IC Engines Advanced Laboratory
, Dipartimento di Energetica, Politecnico di Torino, C.so Duca degli Abruzzi, 24 10129 Torino, Italy
Search for other works by this author on:
Stefano d’Ambrosio,
Stefano d’Ambrosio
IC Engines Advanced Laboratory
, Dipartimento di Energetica, Politecnico di Torino, C.so Duca degli Abruzzi, 24 10129 Torino, Italy
Search for other works by this author on:
Ezio Spessa
Ezio Spessa
IC Engines Advanced Laboratory
, Dipartimento di Energetica, Politecnico di Torino, C.so Duca degli Abruzzi, 24 10129 Torino, Italy
Search for other works by this author on:
Mirko Baratta
IC Engines Advanced Laboratory
, Dipartimento di Energetica, Politecnico di Torino, C.so Duca degli Abruzzi, 24 10129 Torino, Italy
Andrea E. Catania
IC Engines Advanced Laboratory
, Dipartimento di Energetica, Politecnico di Torino, C.so Duca degli Abruzzi, 24 10129 Torino, Italy
Stefano d’Ambrosio
IC Engines Advanced Laboratory
, Dipartimento di Energetica, Politecnico di Torino, C.so Duca degli Abruzzi, 24 10129 Torino, Italy
Ezio Spessa
IC Engines Advanced Laboratory
, Dipartimento di Energetica, Politecnico di Torino, C.so Duca degli Abruzzi, 24 10129 Torino, ItalyJ. Eng. Gas Turbines Power. Nov 2008, 130(6): 062805 (11 pages)
Published Online: August 21, 2008
Article history
Received:
January 28, 2008
Revised:
February 8, 2008
Published:
August 21, 2008
Citation
Baratta, M., Catania, A. E., d’Ambrosio, S., and Spessa, E. (August 21, 2008). "Prediction of Combustion Parameters, Performance, and Emissions in Compressed Natural Gas and Gasoline SI Engines." ASME. J. Eng. Gas Turbines Power. November 2008; 130(6): 062805. https://doi.org/10.1115/1.2943193
Download citation file:
Get Email Alerts
Cited By
Temperature Dependence of Aerated Turbine Lubricating Oil Degradation from a Lab-Scale Test Rig
J. Eng. Gas Turbines Power
Multi-Disciplinary Surrogate-Based Optimization of a Compressor Rotor Blade Considering Ice Impact
J. Eng. Gas Turbines Power
Experimental Investigations on Carbon Segmented Seals With Smooth and Pocketed Pads
J. Eng. Gas Turbines Power
Related Articles
Formaldehyde Formation in Large Bore Engines Part 2: Factors Affecting Measured CH 2 O
J. Eng. Gas Turbines Power (October,2000)
Experimental Study of Effect of Injection Timing on Port Fuel Injection Gasoline, Port Fuel Injection Compressed Natural Gas, and Direct Injection Compressed Natural Gas Engine Performance, Combustion, and Emissions Characteristics
J. Eng. Gas Turbines Power (June,2023)
Three-Dimensional Computational Fluid Dynamics Simulation and Mesh Size Effect of the Conversion of a Heavy-Duty Diesel Engine to Spark-Ignition Natural Gas Engine
J. Eng. Gas Turbines Power (June,2022)
Extending Lean and Exhaust Gas Recirculation-Dilute Operating Limits of a Modern Gasoline Direct-Injection Engine Using a Low-Energy Transient Plasma Ignition System
J. Eng. Gas Turbines Power (November,2016)
Related Proceedings Papers
Related Chapters
Later Single-Cylinder Engines
Air Engines: The History, Science, and Reality of the Perfect Engine
A Simple Carburetor
Case Studies in Fluid Mechanics with Sensitivities to Governing Variables
Alternative Systems
Turbo/Supercharger Compressors and Turbines for Aircraft Propulsion in WWII: Theory, History and Practice—Guidance from the Past for Modern Engineers and Students