Magnetic markers embedded into the roadway pavements are used in Intelligent Transportation Systems to provide the reference signals necessary for guiding and controlling vehicles. This technology has already been implemented in several locations in California to provide driver assistance for snowplow operators in harsh winter environments. Installation of these magnetic markers into the roadway pavement is a tedious manual operation. In this paper, we present a novel design of a robotic system developed for installation of these magnetic markers into the roadway pavement. It is shown how dynamic modeling and simulation can be used with simple experimentation to develop a mechanical design of a robotic system to overcome undesirable effects of vibrations due to drilling the roadway. In addition, two new and innovative concepts are introduced in the design of a robotic system. One is the design of a roller-type traction drive to achieve linear motion that can be used in a gantry robotic system and the second is a self-alignment mechanism for proper insertion of magnetic markers that can be used for any insertion and assembly operations.
Skip Nav Destination
e-mail: rljames@ucdavis.edu
e-mail: bozkan@ucdavis.edu
e-mail: bravani@ucdavis.edu
Article navigation
March 2006
Research Papers
Mechanical Design of a Robotic System for Automatic Installation of Magnetic Markers on the Roadway
Randy James,
Randy James
Department of Mechanical & Aeronautical Engineering,
e-mail: rljames@ucdavis.edu
University of California
, Davis, CA 95616
Search for other works by this author on:
Basar Ozkan,
Basar Ozkan
Department of Mechanical & Aeronautical Engineering,
e-mail: bozkan@ucdavis.edu
University of California
, Davis, CA 95616
Search for other works by this author on:
Bahram Ravani
Bahram Ravani
Department of Mechanical & Aeronautical Engineering,
e-mail: bravani@ucdavis.edu
University of California
, Davis, CA 95616
Search for other works by this author on:
Randy James
Department of Mechanical & Aeronautical Engineering,
University of California
, Davis, CA 95616e-mail: rljames@ucdavis.edu
Basar Ozkan
Department of Mechanical & Aeronautical Engineering,
University of California
, Davis, CA 95616e-mail: bozkan@ucdavis.edu
Bahram Ravani
Department of Mechanical & Aeronautical Engineering,
University of California
, Davis, CA 95616e-mail: bravani@ucdavis.edu
J. Mech. Des. Mar 2006, 128(2): 413-421 (9 pages)
Published Online: May 5, 2005
Article history
Received:
October 8, 2004
Revised:
May 5, 2005
Citation
James, R., Ozkan, B., and Ravani, B. (May 5, 2005). "Mechanical Design of a Robotic System for Automatic Installation of Magnetic Markers on the Roadway." ASME. J. Mech. Des. March 2006; 128(2): 413–421. https://doi.org/10.1115/1.2167654
Download citation file:
91
Views
Get Email Alerts
Cited By
DeepJEB: 3D Deep Learning-Based Synthetic Jet Engine Bracket Dataset
J. Mech. Des (April 2025)
Design and Justice: A Scoping Review in Engineering Design
J. Mech. Des (May 2025)
Related Articles
Introduction of the ASME Journal of Mechanisms and Robotics
J. Mechanisms Robotics (February,2009)
Mechanical Design, Planning, and Control for Legged Robots in Distillation Columns
J. Comput. Nonlinear Dynam (June,2023)
Estimation of the Maximum Tire-Road Friction Coefficient
J. Dyn. Sys., Meas., Control (December,2003)
The 200th Issue of JMD
J. Mech. Des (June,2013)
Related Proceedings Papers
Related Chapters
Mechanical Design Challenges in Rescue Robot Prototyping
Designs and Prototypes of Mobile Robots
Engineering Design about Electro-Hydraulic Intelligent Control System of Multi Axle Vehicle Suspension
International Conference on Instrumentation, Measurement, Circuits and Systems (ICIMCS 2011)
Manufacturing Processes and Materials
Design of Human Powered Vehicles