Skip Nav Destination
Issues
June 2002
ISSN 1050-0472
EISSN 1528-9001
In this Issue
Technical Papers
DEA: A Method for Ranking the Greeness of Design Decisions
J. Mech. Des. June 2002, 124(2): 145–150.
doi: https://doi.org/10.1115/1.1447545
Numeralytics: A Computation Approach for Engineering Practitioners
J. Mech. Des. June 2002, 124(2): 151–157.
doi: https://doi.org/10.1115/1.1460903
Topics:
Computation
,
Mathematics
,
Teaching
,
Engineering mathematics
,
Pendulums
Interactive Virtual Tools for Manipulating NURBS Surfaces in a Virtual Environment
J. Mech. Des. June 2002, 124(2): 158–163.
doi: https://doi.org/10.1115/1.1464132
Topics:
Computer-aided design
,
Shapes
,
Virtual reality
,
Computers
Introduction of a Product Family Penalty Function Using Physical Programming
Achille Messac, Associate Professor, Michael P. Martinez, Graduate Student, Timothy W. Simpson, Assistant Professor
J. Mech. Des. June 2002, 124(2): 164–172.
doi: https://doi.org/10.1115/1.1467602
Topics:
Computer programming
,
Design
,
Motors
,
Optimization
,
Preferences
A Quantitative Similarity Metric for Design-by-Analogy
J. Mech. Des. June 2002, 124(2): 173–182.
doi: https://doi.org/10.1115/1.1475317
Topics:
Design
,
Winding machines
Combined Optimal Design and Control With Application to an Electric DC Motor
J. Mech. Des. June 2002, 124(2): 183–191.
doi: https://doi.org/10.1115/1.1460904
Topics:
Design
,
Engines
,
Motors
,
Optimization
,
Control equipment
Optimization of Turbine Disk Profiles by Metamorphic Development
J. Mech. Des. June 2002, 124(2): 192–200.
doi: https://doi.org/10.1115/1.1467079
Topics:
Design
,
Disks
,
Optimization
,
Stress
,
Turbines
Computation of Optimal Workpiece Orientation for Multi-axis NC Machining of Sculptured Part Surfaces
J. Mech. Des. June 2002, 124(2): 201–212.
doi: https://doi.org/10.1115/1.1468634
Topics:
Machining
,
Machinery
,
Machinability
Optimal Trajectory Planning For Material Handling of Compliant Sheet Metal Parts
J. Mech. Des. June 2002, 124(2): 213–222.
doi: https://doi.org/10.1115/1.1463035
Topics:
Deflection
,
Deformation
,
Finite element analysis
,
Materials handling
,
Sheet metal
,
Simulation
,
Trajectories (Physics)
,
Optimization
,
Design
Modeling of Flexural Beams Subjected to Arbitrary End Loads
J. Mech. Des. June 2002, 124(2): 223–235.
doi: https://doi.org/10.1115/1.1455031
Topics:
Deflection
,
Optimization
,
Stress
,
Modeling
,
Stiffness
A Real Parameter Continuation Method for Complete Solution of Forward Position Analysis of the General Stewart
J. Mech. Des. June 2002, 124(2): 236–244.
doi: https://doi.org/10.1115/1.1446476
Topics:
Kinematics
,
Manipulators
,
Polynomials
,
Geometry
,
Design
,
Numerical analysis
Kinematic Analysis of 3-DOF Position Mechanisms for Use in Hybrid Kinematic Machines
J. Mech. Des. June 2002, 124(2): 245–253.
doi: https://doi.org/10.1115/1.1468860
Topics:
Manipulators
,
Kinematics
,
Rails
Jacobian Analysis of Limited-DOF Parallel Manipulators
J. Mech. Des. June 2002, 124(2): 254–258.
doi: https://doi.org/10.1115/1.1469549
Topics:
Manipulators
,
Jacobian matrices
,
Reactor protection systems
,
Screws
Mobility Analysis of the 3-UPU Parallel Mechanism Assembled for a Pure Translational Motion
J. Mech. Des. June 2002, 124(2): 259–264.
doi: https://doi.org/10.1115/1.1471530
Topics:
Actuators
,
Mechanical admittance
,
Parallel mechanisms
,
Rotation
,
Manipulators
Design of Continuous Backbone, Cable-Driven Robots
J. Mech. Des. June 2002, 124(2): 265–271.
doi: https://doi.org/10.1115/1.1447546
Topics:
Cables
,
Design
,
Displacement
,
Kinematics
,
Robots
,
Stress
,
Tension
,
Robot kinematics
Structural Synthesis of Multi-Fingered Hands
J. Mech. Des. June 2002, 124(2): 272–276.
doi: https://doi.org/10.1115/1.1467080
Design and Control of a Force-Reflecting Haptic Interface for Teleoperational Grasping
J. Mech. Des. June 2002, 124(2): 277–283.
doi: https://doi.org/10.1115/1.1470493
Topics:
Control algorithms
,
Design
,
Grasping
,
Haptics
,
Manipulators
,
Actuators
,
Control equipment
,
Linkages
,
Degrees of freedom
,
Design engineering
Synthesis of Universal Motion Curves in Generalized Model
J. Mech. Des. June 2002, 124(2): 284–293.
doi: https://doi.org/10.1115/1.1471360
Topics:
Displacement
,
Shapes
Generation and Forward Displacement Analysis of Analytic Planar Parallel Manipulators
J. Mech. Des. June 2002, 124(2): 294–300.
doi: https://doi.org/10.1115/1.1468224
Kinematic and Kinetostatic Synthesis of Planar Coupled Serial Chain Mechanisms
J. Mech. Des. June 2002, 124(2): 301–312.
doi: https://doi.org/10.1115/1.1464563
Topics:
Chain
,
Design
,
End effectors
,
Kinematics
,
Optimization
,
Torque
,
Springs
,
Degrees of freedom
3D Mesh Generation for Static Stress Determination in Spiral Noncircular Gears Used for Torque Balancing
J. Mech. Des. June 2002, 124(2): 313–319.
doi: https://doi.org/10.1115/1.1470492
Topics:
Gears
,
Mesh generation
,
Stress
,
Torque
,
Gear teeth
,
Finite element methods
Effects of Taper Variation on Conical Threaded Connections Load Distribution
J. Mech. Des. June 2002, 124(2): 320–329.
doi: https://doi.org/10.1115/1.1456459
Topics:
Stress
,
Thread
,
Torque
,
Finite element analysis
On the Reverse of One Property of Involute Gears
J. Mech. Des. June 2002, 124(2): 330–333.
doi: https://doi.org/10.1115/1.1456162
Static and Dynamic Tooth Loading in Spur and Helical Geared Systems-Experiments and Model Validation
J. Mech. Des. June 2002, 124(2): 334–346.
doi: https://doi.org/10.1115/1.1462044
Topics:
Bearings
,
Errors
,
Finite element analysis
,
Gears
,
Helical gears
,
Rotors
,
Spur gears
,
Stiffness
,
Stress
,
Model validation
Technical Briefs
Maximization of Workspace Volume of 3-DOF Spatial Parallel Manipulators
J. Mech. Des. June 2002, 124(2): 347–350.
doi: https://doi.org/10.1115/1.1462621
Topics:
Manipulators
,
Motors
,
Robots
,
Engineering prototypes
,
Engines
Optimized Kinematic Properties for Stevenson-Type Presses With Variable Input Speed Approach
J. Mech. Des. June 2002, 124(2): 350–354.
doi: https://doi.org/10.1115/1.1456163
Topics:
Cutting
,
Design
,
Optimization
,
Power presses
,
Servomotors
,
Trajectories (Physics)
,
Kinematics
Design of a PZT Bimorph Actuator Using a Metamodel-Based Approach
David J. Cappelleri, Graduate Research Assistant, Mary I. Frecker, Assistant Professor, Timothy W. Simpson, Assistant Professor, Alan Snyder, Associate Professor
J. Mech. Des. June 2002, 124(2): 354–357.
doi: https://doi.org/10.1115/1.1446866
Topics:
Actuators
,
Deflection
,
Design
,
Finite element analysis
,
Optimization
,
Surgery
,
Approximation
,
Finite element model
Errata
Erratum: “Corner-Filleted Flexure Hinges” [ASME J. Mech. Des., 123, No. 3, pp. 346–352]
J. Mech. Des. June 2002, 124(2): 358.
doi: https://doi.org/10.1115/1.1431262
Erratum: “An Automatic Method for Finding the Assembly Configurations of Planar Non-Single-Input-Dyadic Mechanisms” [ASME J. Mech. Des., 124, No. 1, pp. 58–67]
J. Mech. Des. June 2002, 124(2): 359.
doi: https://doi.org/10.1115/1.1475316
Topics:
Manufacturing
,
Computer-aided engineering
,
Kinematics
,
Position control
Email alerts
RSS Feeds
DeepJEB: 3D Deep Learning-Based Synthetic Jet Engine Bracket Dataset
J. Mech. Des (April 2025)
Design and Justice: A Scoping Review in Engineering Design
J. Mech. Des (May 2025)