The co-production of Zn and synthesis gas by the combined reduction of ZnO and reforming of has been performed using a vortex-flow chemical reactor in a high-flux solar furnace. The reactor operating temperature ranged between 1221 and 1481 K for an input solar power of 2.3 to 4.6 kW and mean solar flux intensities of 810 to 1609 kW/m2. The performance of the reactor was determined by conducting a complete mass and energy balance for the chemical process. The chemical conversion ranged between 83–100 percent. The thermal efficiency, defined as the portion of input solar power absorbed as sensible and process heat, was in the range 11–28 percent. The exergy efficiency for the closed cycle, defined as the ratio of the maximum amount of work that the products leaving the reactor could produce if were re-combined to the input solar power, was in the range 0.3–3.1 percent. Major sources of energy loss are re-radiation heat transfer through the reactor aperture, conduction heat transfer through the reactor walls, and the quenching of the reaction products.
Skip Nav Destination
Article navigation
August 2001
Technical Papers
Experimental Investigation of a Vortex-Flow Solar Chemical Reactor for the Combined ZnO-Reduction and -Reforming*
Stefan Kra¨upl,
Stefan Kra¨upl
Solar Process Technology, Paul Scherrer Institute, CH-5232 Villigen, Switzerland
Search for other works by this author on:
Aldo Steinfeld
Aldo Steinfeld
Department of Mechanical and Process Engineering - Institute of Energy Technology, ETH-Swiss Federal Institute of Technology, ETH-Zentrum, CH-8092 Zu¨rich, Switzerland
Search for other works by this author on:
Stefan Kra¨upl
Solar Process Technology, Paul Scherrer Institute, CH-5232 Villigen, Switzerland
Aldo Steinfeld
Department of Mechanical and Process Engineering - Institute of Energy Technology, ETH-Swiss Federal Institute of Technology, ETH-Zentrum, CH-8092 Zu¨rich, Switzerland
Contributed by the Solar Energy Division of the American Society of Mechanical Engineers for publication in the ASME JOURNAL OF SOLAR ENERGY ENGINEERING. Manuscript received by the ASME Solar Energy Division, Dec. 2000; final revision, Feb. 2001. Associate Editor: D. M. Blake.
J. Sol. Energy Eng. Aug 2001, 123(3): 237-243 (7 pages)
Published Online: February 1, 2001
Article history
Received:
December 1, 2000
Revised:
February 1, 2001
Citation
Kra¨upl, S., and Steinfeld, A. (February 1, 2001). "Experimental Investigation of a Vortex-Flow Solar Chemical Reactor for the Combined ZnO-Reduction and -Reforming." ASME. J. Sol. Energy Eng. August 2001; 123(3): 237–243. https://doi.org/10.1115/1.1384569
Download citation file:
Get Email Alerts
Mass Flow Control Strategy for Maximum Energy Extraction in Thermal Energy Storage Tanks
J. Sol. Energy Eng (December 2025)
Exergy Optimization of a Hybrid Multi-Evaporative Desalination Plant Powered by Solar and Geothermal Energy
J. Sol. Energy Eng (June 2025)
Correlation for Maximum Heat Transfer Between Fluidized Bed and Its Wall and Application to Solar Power Plants
J. Sol. Energy Eng (June 2025)
Related Articles
Pulsed Gas Feeding for Stoichiometric Operation of a Gas-Solid Vortex Flow Solar Chemical Reactor
J. Sol. Energy Eng (May,2001)
Monte Carlo Radiative Transfer Modeling of a Solar Chemical Reactor for The Co-Production of Zinc and Syngas
J. Sol. Energy Eng (February,2005)
Operational Performance of a 5-kW Solar Chemical Reactor for the Co-Production of Zinc and Syngas
J. Sol. Energy Eng (February,2003)
Performance Study of a Bi-Directional Thermodiode Designed for Energy-Efficient Buildings
J. Sol. Energy Eng (August,2002)
Related Proceedings Papers
Related Chapters
Energy Balance for a Swimming Pool
Electromagnetic Waves and Heat Transfer: Sensitivites to Governing Variables in Everyday Life
How to Use this Book
Thermal Spreading and Contact Resistance: Fundamentals and Applications
Radiation
Thermal Management of Microelectronic Equipment